1. This device is pneumatic semi-automatic machine tools, own manual / automatic function and moving pedal switch, which both start and emergency stop and other devices, make your operation safer.
2. Can cut all kinds of section shape of simple steel, stainless steel, raw steel material, aluminum material and other metal products, especially, is the ideal cutting tool for all kinds of tubes and pipes
3.Clamp adopt imported-type, clamp force is strong and hard to wear; blade is hard to crack. When cutting pipe, blade no runout and beat phenomenon and misgiving. Feeding speed is steady.
4. Transmission parts are flexible and reliable. Compared with other types of technology methods, it increasing the efficiency of cutting pipe, and the device stability and reliability is higher, smaller footprint.
5. R & D process in the device uses a number of self-developed technologies to greatly reduce the failure rate of machine work, machine life significantly improved. After the actual test, in job stability, pipe cutting efficiency and parts service life has been better than the imported equipment.
6. After rigorous testing, Machine parts quality is superior and specifications unified
7. Fast, convenient, efficient, saving labor and processing times, etc.
8. To ensure that the service life of the machine, machine parts with imported components.
9. This machine is easy to use, non-technical personnel can operate freely
, and saves oil and electricity as well
10. Overall design is new optimization, small size, versatility, solid body is not deformation.
11. The machine structure designed reasonable, solid and reliable, and smooth operation.
12. Cooling liquid is automatic cycle, to ensure section is smooth and blade life is long.
13. Sawdust is centrally treated, convenient and clean.
Main technical parameters
|
type
|
XM-275SS
|
Main motor
|
YD 100L 1-2/4 2.2/2.4KW
|
Cooling pump motor
|
380V 40W
|
Pneumatic press
|
0-1MPa
|
Motor
|
3HP 2.2KW
|
The largest opening of the bench vise
|
100MW
|
Applicable saw blade
|
High speed steel saw blade 250/275
|
Pin hole 2*11*63 inner hole ¯32
|
Motor speed switch
|
0-1-2 pot
|
Table size (L × W × H)
|
530×430×800mm
|
Maximum external dimension of machine
|
575(total length)×900(total width)×1300(total height)mm
|
Machine weight
|
About 220kg
|
|
Maximum cutting capacity (mild steel)
|
Symbol
|
Tangent 90°(mm)
|
Chamfercut 45°(mm)
|
○
|
Φ80
|
Φ60
|
□
|
75×75
|
50×50
|
┴
|
75×75
|
50×50
|
●
|
Φ38
|
Φ25
|
■
|
38×38
|
25×25
|
|
90×75
|
60×50
|